RC-Monster Forums  

Go Back   RC-Monster Forums > Support Forums > Brushless

Reply
 
Thread Tools Rate Thread Display Modes
Old
  (#1)
Rtsbasic
RC-Monster England!
 
Rtsbasic's Avatar
 
Offline
Posts: 425
Join Date: Jun 2005
Location: North Devon, England
09.27.2005, 07:35 AM

Fast discharging at 10 amps down to 0.9v/cell doesn't actually bring the nominal voltage that low. A cells voltage may be 0.9v at 10 amps, but at 2 amps its closer to 1.1v. I have had no problems or unbalanced packs using this method for several months now on both matched and unmatched/very low packs. In the UK this is the most common method of looking after cells when racing I have observed, the biggest variation is if you equalise after fast discharge, or just before recharging, I do it just before recharging.

Contrary to what a lot of people say, you can take NIMH's below 0.5v/cell or even dead short them, if you start doing it while they're new, otherwise they don't take to it well. Doing this shortens their life and runtime but does give a noticable increase in punch.

If the cells were that unbalanced that one cell can be 0.9v and another 0.2v causing damage the packs not likely to be any good anyway. I personally haven't seen this much variance in cells even on packs that have been abused on a pulse charger for over a year.

Last edited by Rtsbasic; 09.27.2005 at 07:38 AM.
  Send a message via Yahoo to Rtsbasic  
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump







Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com