For those of you using a mm esc w/GriffinRu's mod 1 done, any probs on 5s?

[lincpimp]

I cooked my first mod1 mm on 5s.

Not really the esc or griffin's fault. I got a rock stuck in the pinion/spur while at full throttle. I sent it back to him and he had a look. Supposedly the mm had alot of solder in one area, and the intense heat that was created by full power going into a stalled motor caused the solder to melt and bridge two phases, thus smoking the esc.

I had him do another and have had great success with 5s.