1/8 buggys with outrunner power

[lincpimp]

Originally Posted by MetalMan

To me that material looks about 1/16", though.

I see it flexing quite a bit too. Maybe he could triangulate it forward to the chassis with a link on each side?

I toyed with the idea of making a bracket that could support the other end of the outrunner, with a bearing around the shaft. That way it is bearing supported at each end, not just the mount end. I decided not to, but i am just running a smaller axi in the redcat, which is 10th scale. And my mount is reasonably thick 6061 t6 al.