Lightning stadium basher setup please help

[Arct1k]

Curious to see what ppl suggest here... You have pretty limiting constraints... 10 cells isn't really very much - approx 3s lipo voltage (but with less performance).

60a is probably over-rated and hence not much to work with... Agree 110% if you're on a budget to build or get a el cheapo battery tray (note a broken rustler or stampede chassis works well - for postage I think I can get you one for free).

I would "invest" in an rcm motor mount.... http://www.rc-monster.com/proddetail...=LSPmotormount

I would suggest something with a higher KV in the 3000+ kv range and gear down. Guessing your budget you could try an AMMO or a used feigao L can.

http://www3.towerhobbies.com/cgi-bin...&I=LXLWZ7&P=SM 50mm 3300KV
http://www3.towerhobbies.com/cgi-bin...&I=LXLXA0&P=SM 56mm 2600KV

PS LSP's work ok with rotated diffs and you could run twin packs at the rear

PPS what is the full spec of the esc?

this is a budget build and also a bit of an experiment I am thinking about a 6L it seems to be the motor i keep leaning towards but I am not sure how it will hold up as far as run times go as well according to the calc i found on here 12v for a 6l will be exceeding the max rpm but i couldnt find specific info on what the max rpm is if its not wha ti want inthe end adding to it and replacing parts is an option but for now this is what i am leaning towards jsut to get me running

the esc is the 60a mystery esc off ebay