IMO people who run high MAH packs are trying to make up for a lack of voltage or C rating
I dont think that is all true. I run 5000mah packs myself because they last a good amount of time for running but are not overly sized for the vehicles. Also the FP's are 25c so i do not see myself have a problem even with 2500mah but than my run time will be cut in half. I do it purely for more run time.
I dont think that is all true. I run 5000mah packs myself because they last a good amount of time for running but are not overly sized for the vehicles. Also the FP's are 25c so i do not see myself have a problem even with 2500mah but than my run time will be cut in half. I do it purely for more run time.
I run the same packs as you do
I dont consider 5000 to be a high capacity pack or the EVO25 to be a low C rating...if you go to a 8000mah pack or run a Maxamps 20c or a 15c pack or below.......
I run the same packs as you do
I dont consider 5000 to be a high capacity pack or the EVO25 to be a low C rating...if you go to a 8000mah pack or run a Maxamps 20c or a 15c pack or below.......
i see what you are saying now. That is why i just stay with FP and call it good then i know i will not have a problem Maxamps, well i will not go there.
Now I am buying needed parts to this project. I talked with my good friend about those Zippy packs. I Will buy 2 x 3S 5K Zippy packs, and when I get them, we will test those packs with e-sky. If those packs are good enough, I will keep them, if they are not, I will sell them for someone who need good and cheap LiPo pack to smaller car like stampede. Then I will buy FlightPower or maxamps LiPo's if I dont find something better.
The charger that I am buying, is GT-A8 - G.T.Power A8 8Cell balancer/Charger . I will buy MMM V2 when they are in stock, I don't know about the motor yet. Seems like I will buy KB45-08XL 1700Kv motor to testing, so I can find easily good gearings with it. If its not good motor, I will think about the Neu 1515 motors.
I will send some pictures when I get those parts :P