Nitro 4-Tec conversion

[TDC57]

That 2 speed setup looks trick, when / what speeds does it kick in at, or is that your 3rd channel (?)..

Looking forward to see it run..

Good luck (not that you need it)..

[lincpimp]

Originally Posted by TDC57

That 2 speed setup looks trick, when / what speeds does it kick in at, or is that your 3rd channel (?)..

Looking forward to see it run..

Good luck (not that you need it)..

It is an auto shifter, has a one way braing on the first gear, and a rpm based clutch on the second speed. Std traxass 2 speed in design, just outside of the case!

Thanks, I need all the luck I can get!!!

[lincpimp]

Got the motor mount today from impakt. The CC motor will not work as it has small screws that hold the endbells on, and they stick out the sides, effectively making the motor larger than 36mm in diameter. I tried a few feigao and hacker motors and they fit fine, will try out my 2500kv aveox and see how it does. If it fits I will run it on 4s lipo, instead of 2s with the cc 5700. Still need to mock up the chassis, and build the clutch.