Medusa in a Truggy

Mine has no trouble in my Erevo,36-60-2000,it really likes 5s.

Originally Posted by asheck

Mine has no trouble in my Erevo,36-60-2000,it really likes 5s.

That's good to know. I still think a truggy is going to be a bit harder on the motor than an e-revo. No transmission/slipper, and probably a tad more weight.

I suppose it's worth a shot, but probably not the ideal motor selection.

J.

[Matthew_Armeni]

I run a 1300kv 60mm Medusa in my Losi 8T on 6s through a MM. I run the Tekno conversion with clutch and mechanical brakes. The motor is plenty to pull the truggy around, especially if you are racing it.

Originally Posted by Matthew_Armeni

I run a 1300kv 60mm Medusa in my Losi 8T on 6s through a MM. I run the Tekno conversion with clutch and mechanical brakes. The motor is plenty to pull the truggy around, especially if you are racing it.

That's good to hear. I've been advised several times against the 60mm medusa for a 1/8th truggy. You have no problems with heat ? It's really amazing what those little MM controllers will do. They hang with some of the "best" ESC's out there. I smoked a couple quark 125's and an MGM160 and the MM just kept right on.