Modified Tekin R1Pro

[GriffinRU]

Originally Posted by lutach

I need a ESC to be fixed. It's a small 60A controller that uses the OnSemi's 4833. I burned a couple (Maybe a few) and I would like to get it fixed, but I wanted to know if there's a better MOSFET out there. The ESC that I have is only rated for 3S (Maybe 4S) and I don't want to send it all the way to China.

Regards.

Send it to me i'll fix it for you...

[lutach]

Originally Posted by GriffinRU

Send it to me i'll fix it for you...

Ok, but do you have the FETs there? I haven't been able to find small amounts of the 4833 and that's why I asked if there's a better FET available.

Regards.

[GriffinRU]

Originally Posted by lutach

Ok, but do you have the FETs there? I haven't been able to find small amounts of the 4833 and that's why I asked if there's a better FET available.

Regards.

I thought you can provide parts:)

You can get samples from ON Semiconductor...

I do not have them.

[lutach]

Originally Posted by GriffinRU

I thought you can provide parts:)

You can get samples from ON Semiconductor...

I do not have them.

I can, but for large quantities. I'll give my rep a call tomorrow to get some samples. He'll be a bit shocked .

[lutach]

Artur,

I have the 4833 coming in probably tomorrow.

Please look at the following datasheets:

http://www.infineon.com/dgdl/BSC014N...1a38f5a96704e8
http://www.infineon.com/dgdl/BSC016N...13de4a19bb0334
http://www.st.com/stonline/products/...l150n3llh5.pdf
http://www.onsemi.com/pub/Collateral/NTMFS4833N-D.PDF

Which one looks to be the best out of the 4 listed? This is what I was asking before, if there's better MOSFET then the 4833.

Artur sorry to hijack , R1 Pro is on the way which i will want to get modded like Jeffs .
Check your PMs from yesterday , i will send you my MM to get modded when i get that back i will then send you the R1 pro.

[lutach]

Artur,

I have the 4833 here with me and will ship it and the esc out to you soon.

Regards.

Edit: I sent you an e-mail with confirmation number Artur.