Modified Tekin R1Pro

[lutach]

Originally Posted by GriffinRU

I thought you can provide parts:)

You can get samples from ON Semiconductor...

I do not have them.

I can, but for large quantities. I'll give my rep a call tomorrow to get some samples. He'll be a bit shocked .

[lutach]

Artur,

I have the 4833 coming in probably tomorrow.

Please look at the following datasheets:

http://www.infineon.com/dgdl/BSC014N...1a38f5a96704e8
http://www.infineon.com/dgdl/BSC016N...13de4a19bb0334
http://www.st.com/stonline/products/...l150n3llh5.pdf
http://www.onsemi.com/pub/Collateral/NTMFS4833N-D.PDF

Which one looks to be the best out of the 4 listed? This is what I was asking before, if there's better MOSFET then the 4833.

Artur sorry to hijack , R1 Pro is on the way which i will want to get modded like Jeffs .
Check your PMs from yesterday , i will send you my MM to get modded when i get that back i will then send you the R1 pro.

[lutach]

Artur,

I have the 4833 here with me and will ship it and the esc out to you soon.

Regards.

Edit: I sent you an e-mail with confirmation number Artur.

[GriffinRU]

Well, as promised, Mike's ESC is fixed and ready for testing again.
Still not clear what went wrong with brains pcb...

Meanwhile, I am in process of moving, so cannot accept any orders until I am done and my place is ready.
I am hoping to be back in October.

[jhautz]

Just a little update on the GriffinRU R1Pro I am running. Ran it again this weekekend at round 3 of the Prarieland Shootout. Once again It ran with no issues. Temped a 154F on the esc after the 15 minute B main. This is with no fans at all. So all is good. I dont forsee ever removing this spedo from my 808.



If anything changes I'll let you guys know, but to date this by far my favorite 1/8 buggy race esc.

[pb4ugo]

How much of an improvement is the modified version over running an out of the box version with the upgraded cap?

I'm loving the hell out of my R1 Pro to the point of recomending them to everybody and ordering five more. I'd be interested in having the mods done to all of them if reasonably priced and improved performance.