strange neu deal

[brushlessboy16]

858-674-2250
thats what i called, the lady was being rude and told me there wasnt any 15 series

[bl-is-future]

Yeah i agree you should call them and tell them what you got. Granted it is tempting to just keep it but as Brian said there is what is called karma.

BTW thanks brushlessboy for the number

[brushlessboy16]

well said brian, my mom and i purchased a big craftsman toolbox for my dad's b-day
the one we wanted was 12 drawers and ballbearing slides. well we go into Sears and the one we wanted was right by the door all shiny and all :D...its taken and they have no more instock (sears warehouse had a fire) so we go back and fourth with the department guy and he eventually calls his manager. my mom goes down this big list.. we want this,this,this, and this, just like the floor model and dont want to pay more then the 400 dollars. after 2 hours in the store being very patient they struck up a deal i higher model all ball bearing drawers, ball bearing caster wheels, griplatch 18 drawer for the price of of the floor model 12 drawer.. the biggun' sells for 975 dollars and she walked out of sears with it for $451


shows what a bit of good can do for you

[brushlessboy16]

when did you buy the motor?

Originally Posted by brushlessboy16

when did you buy the motor?

I paid them on 8-04-08 and received it yesterday

what know one seems to understand here is that they have a box with these tested motors in it..at the time I called this motor was the only 15 series motor that was available but it wasnt even put up on the webpage yet so she didnt know what to charge me for the motor so she told me to call back when she talk to the person in charge (steve) and when I called back she said they wanted $100

now you must realize that when the motors are posted on there website all the motors are priced at around $100 some higher for big big motors or motors with fans built on..even there smaller series motors are $100

[bl-is-future]

i dont think cost is really the point. It is a point of honesty. If you are dishonest it WILL come back to bite you in the ass sooner or later. I have seen it happen to many before.

Originally Posted by bustitup

I paid them on 8-04-08 and received it yesterday

what know one seems to understand here is that they have a box with these tested motors in it..at the time I called this motor was the only 15 series motor that was available but it wasnt even put up on the webpage yet so she didnt know what to charge me for the motor so she told me to call back when she talk to the person in charge (steve) and when I called back she said they wanted $100

now you must realize that when the motors are posted on there website all the motors are priced at around $100 some higher for big big motors or motors with fans built on..even there smaller series motors are $100

[aqwut]

Originally Posted by bl-is-future

i dont think cost is really the point. It is a point of honesty. If you are dishonest it WILL come back to bite you in the ass sooner or later. I have seen it happen to many before.

Damn right.. it always comes back and bite you in the ass...

but I bet you Neu will just let you have it without any extra charges... Hopefully this is the case...

[skellyo]

If your packing slip/invoice shows a 1515/2.5D I don't see a problem. If it says 1512/2.5D, I'd definitely call them.

Originally Posted by skellyo

If your packing slip/invoice shows a 1515/2.5D I don't see a problem. If it says 1512/2.5D, I'd definitely call them.

well thats another thing..I wasnt given any paper work what so ever....just a motor bubble wrapped in a small box

but I am going to call them today again to ease everyones mind

[bl-is-future]

now good things will happen to you. seriously though, see all is well.

[bl-is-future]

i feel the only thing lacking is voltage. 3s is a little low for a revo. 4s min i woudl say. But if you are saying 2 of those above than YES they will be fine. I just got a set of 2s (4s total) true rc and run them with a 15151y in a hyper 7 and they dont even get hot, barely warm and NO PUFFING. great lipos for the money.

Originally Posted by bl-is-future

i feel the only thing lacking is voltage. 3s is a little low for a revo. 4s min i woudl say. But if you are saying 2 of those above than YES they will be fine. I just got a set of 2s (4s total) true rc and run them with a 15151y in a hyper 7 and they dont even get hot, barely warm and NO PUFFING. great lipos for the money.

yes I meant 2 of them for 6's...they only had 75a cont. so I didnt know if they would be ok

I have the same 2s2p 8000 15c two of them for 4's in my medusa 36-60-2000 and they are great

[TexasSP]

Give the guy a chance. He is obviously not dishonest as he came on here honestly seeking advice. I am sure he will make an effort with neu and all will be well.

[bl-is-future]

sorry tex you are a little behind... he has contacted neu already and all is well

Originally Posted by TexasSP

Give the guy a chance. He is obviously not dishonest as he came on here honestly seeking advice. I am sure he will make an effort with neu and all will be well.

[TexasSP]

Originally Posted by bl-is-future

sorry tex you are a little behind... he has contacted neu already and all is well

My computer had a brain fart and didn't process my click until later or something.