Adding capacitors to a Quark 125B

[BrianG]

I think these are the settings I use:


- Default brake strength (normal)
- Default drag brake (second option up from 3%)
- Battery type is "manual"
- Battery LVC is set to 3.0v/cell
- Torque Selection is Normal 1.
- Neutral range is narrow (makes for a more gradual/smooth start)

[pullinteef]

Thanks. I've been having a hard time keeping temps down on both ESC and motor. My 1512/2D/S died last weekend- not sure if it demagnetized from heat or something else (just stopped after a big jump about 8 minutes into the main, and felt really weird when turning the shaft), so I'm forced to temporarily use my 3 year old 540C-9L motor while the motor gets repaired by Neu. Don't know if it will hold up to 15 minute mains.