a question about bk

[Semi Pro]

Originally Posted by E-Traxxer

All the Feigaos that I know of are 2 pole motors, so you should be just fine with that current motor. Just be wary if you want to switch to a Neu or something else, as it may not be such a great combination.

good to know, im sure if i were to go nue, i would want a much better esc anyway

Originally Posted by Semi Pro

good to know, im sure if i were to go nue, i would want a much better esc anyway

Agreed, haha.
I also just noticed in the pic that the red battery lead is exposed. It might be a good idea to add another layer of heatshrink to it so that it won't short against the chassis (make sure to cut a hole over the heatsink if you do, so that heat can escape). If you do put some heatshrink on it, make sure that the red jumper located under the red wire is somewhat easily accesible. IIRC, the red jumper is used to program the ESC (taking it off enables programming mode.. I think).

Also, do you know what shock towers those are? I've been looking for something like those...

Edit: if you haven't seen this thread, it'd be a good idea to look, as it details step by step how to progrm your BK esc, as it is a bit complicated.
http://www.rc-monster.com/forum/showthread.php?t=8