Batch 2 V2 MMM - RC-Monster Forums

DRIFT_BUGGY · 08.17.2008, 08:07 PM

Anyone know how many V1's are still out there?

08.17.2008, 08:22 PM

Quote:

Originally Posted by DRIFT_BUGGY

Anyone know how many V1's are still out there?

My buddy runs one in his e-maxx and has since I had mine that failed.

blueb8llz · 08.18.2008, 01:31 AM

Quote:

Originally Posted by DRIFT_BUGGY

Anyone know how many V1's are still out there?

im still using a v1 on 4s

lincpimp · 08.18.2008, 02:18 AM

My V1 has a few hours on it with 4s lipo and a 1515 1.5d, and no issues so far.

I did clearance the bottom of the case so that the fan plug did not rest on it. I also enlarged the opening that the signal and switch wires exit thru. And I added some high density foam underneath the main pcb to support it. That way the board could not knock against the bottom cover during a hard landing. My fan still works too.

e-mike · 08.18.2008, 06:22 AM

Quote:

Originally Posted by lincpimp

I did clearance the bottom of the case so that the fan plug did not rest on it. I also enlarged the opening that the signal and switch wires exit thru. And I added some high density foam underneath the main pcb to support it. That way the board could not knock against the bottom cover during a hard landing. My fan still works too.

i did that on both of my v1 and still going stong

brushlessboy16 · 08.18.2008, 09:56 AM

Quote:

Originally Posted by lincpimp

My V1 has a few hours on it with 4s lipo and a 1515 1.5d, and no issues so far.

I did clearance the bottom of the case so that the fan plug did not rest on it. I also enlarged the opening that the signal and switch wires exit thru. And I added some high density foam underneath the main pcb to support it. That way the board could not knock against the bottom cover during a hard landing. My fan still works too.

does that void your warranty?

and has this problem been fixed on the v2's?