Project: E-Mugen MBX5-T

[Steve Krug]

WELL..........Wanna know what happened today with my NEW MMM V2?









Nothing but good news!!!!! :) :D

It seems as if the Mamba Monster has solved all of the problems i have been having...this is rediculous....

FIRST, I have to tell you my old setup temps....

OLD SETUP:
MM W/ Fan: 180 F
Feigao 8XL : 210F
Zippy 4S lipo : 115 F



I had that old Feigao 9XL that Entjoles gave me and I decided, hey what the heck, i'll give this motor another try...(it heated up my MM to 180 degrees....and it ran at 180...)

So I solder'd up some bullet connectors on the MMM to connect to the motor...Solder'd up a deans on the MMM too...

Got everything setup, programmed the MMM...and I just hoped for the best...

I turned it on outside, started giving it throttle...and MAN, this speedo is smooth.. No cogging what-so-ever at startup...

Then I gave it a little more throttle...it EXPLODED with speed...The MM just wasn't capable of putting the 4S lipo power to the ground it doesn't seem like, now that I look back at it.

I took it out to the street (keep in mind this was a few minutes ago and it is dark...)
And I gave it 3/4 throttle for a second...its too fast (especially in the dark)..I couldn't go full...I was afraid I couldn't see it...LOL.

I bring it in for temps after running it around for a good 10 minutes non-stop..was running pretty light on it but STILL... here are the temps:

NEW SETUP:

MMM: 86F
Feigao 9XL: 120F
Zippy 4S lipo: 85F



What a difference...
The most important purchase was the MMM...It solved ALL my problems...now my truck runs great...