Batch 2 V2 MMM

[xtremelimits285]

Originally Posted by jhautz

My V2 puts out 6.0v and my V1 put out 5.42v. I definitly think it has been changed from the origianal 5.5V standard.

Yep , i put the volt meter to my v2 MMM and im seeing 6.0v on the MMM's bec...

With my MMM plugged in & my Futaba Digital S9351 servo plugged into my Futaba 2.4Gh 6ch Rx i am seeing 6v-5.95v, an when turning the steering servo to full lock(left or right), im seeing 6v-5.9v...

Now just for 0.2-0.5sec it drops to 5.8-5.75v when turning, but thats when the servo first moves under a Heavy load / my hand pushing down on the frontend an holding it down, but after 0.2-0.5sec it goes right back up too 5.8v-5.9v even while still loaded up / me pushing down on the frontend....

So the lowwest the new v2 MMM's bec drops is 5.75v, Under a Heavy Load.