what power cap to use

[NovakTwo]

Here is the info sheet we prepared on power caps:

Power Caps and TranCap Modules

Since we prepared this page, we have added 3 additional modules to our product line. Any other questions, let me know and I will ask the Engineers.

Thats is some interesting information and I must commend Novax2 for passing this knowledge on to possable none novak esc users

Novak2 isnt it true that Novak does not make a esc capable of 6s lipo?

[NovakTwo]

Originally Posted by bustitup

Thats is some interesting information and I must commend Novax2 for passing this knowledge on to possable none novak esc users

Novak2 isnt it true that Novak does not make a esc capable of 6s lipo?

You are correct.

[NovakTwo]

Our speed controls have featured external power caps for years. If a cap blows out, it is much easier to replace the external module than sending the esc back to the factory for service. Novak (also) does not warranty damage when the customer solders directly on the internal PCBs.

That's why we design escs so that almost everything can be user plugged-in, replaced or upgraded. Shipping and handling costs have sky-rocketed----so that the fewer items that have to be returned to the factory, the better.

[lind5]

Originally Posted by NovakTwo

Here is the info sheet we prepared on power caps:

Power Caps and TranCap Modules

Since we prepared this page, we have added 3 additional modules to our product line. Any other questions, let me know and I will ask the Engineers.

ok thanks for the info guys
am i right in saying that i can wire the extra cap to the input power cables (+ and -)
on my esc just like i hace my external ubec is wired