 |
|
|
|
 |
|
|
 |
 |
|
 |
|
(#1)
|
|
RC-Monster Carbon Fiber
Offline
Posts: 229
Join Date: Mar 2007
Location: Rockport, TX
|
09.15.2008, 12:12 AM
I'm assuming you don't have the LVC set? If you have your LVC set for a 4s pack and plug in a 2s pack.. well.. it may do what you're describing.
-Jeff |
    |
|
 |
 |
 |
|
|
|
|
|
|
(#2)
|
|
Guest
Posts: n/a
|
09.15.2008, 08:32 AM
the lvc was set for 6.4 on the 2s. lets hope this behaviour is a one off...maybe.
|
|
|
|
|
|
|
|
|
|
|
|
|
(#3)
|
|
RC-Monster Stock
Offline
Posts: 15
Join Date: Aug 2008
|
09.15.2008, 02:48 PM
I would recommend to:
1. Re-sync your Rx to your Tx 2. Re-sync your tx/rx to your MMM 3. Reset all the MMM settings 4. Change the batts all over/ recharge them all 5. Check all your connections, and double check. I just had my MMM give the same symptoms, and the culprit was a crossed wire inside one the board. |
|
|
|
|
|
|
|
|
|
|
|
|
(#4)
|
|
RC-Monster Aluminum
Offline
Posts: 972
Join Date: Feb 2008
|
09.15.2008, 03:24 PM
How much voltage due you run it on? 7.2v? or 14.4v? What JeffEmbracedDC said basically.
|
|
|
|
|
|
|
|
|
|
|
|
|
(#5)
|
|
Guest
Posts: n/a
|
09.18.2008, 01:18 AM
the li-po is only 7.2v. i just got some evo 25 flighpower packs off ebay real cheap. they are 11.1v, but when i got them they look so small. can i safely run these on my truck? one at a time? parrallel? not at all. they are 2200mAh @ 11.v. i got 2 of them. i am thinking of running them with my lipo sack around them just in case...
guys? |
|
|
|
|
|
|
 |
«
Previous Thread
|
Next Thread
»
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | Rate This Thread |
Hybrid Mode
|
|
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
Copyright ©2000 - 2026, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
