2.5d wont bolt up

[E-Revonut]

I had that same problem when I first hooked my v2 up. Hook up the castle link and update the firmware, that solved the problem for me.

someone on traxxas forums nailed it

see i programed the mmm before I calibrated it so this guy said go back to castle link and choose default settings then....calibrate the mmm when your done go back to castle link and program...it worked....plus i had to update the firmware from 3.05 to 3.11

thanks for the help guys

[jhautz]

It looks like the motor on the right in the picture is an older Neu. The orignal motors had a smaller screw mounting bolt pattern. I have an old one like that also. I got an adapter plate from Mike for it .

Be carefull drilling holes in the front of the can!!! If you break thru and the drill hits the windings behind it and damages them it could be the end for that motor. You are a brave soul. Thats not something I would have tried.