Testing a couple of 1/10 120A ESC (Pictures of the 200A is in here too) - RC-Monster Forums

lutach · 10.17.2008, 08:17 PM

Quote:

Originally Posted by ffactory666

That's great to know , what kv is the Aveox RC7 . Trying to work out what rpm you were spinning on 3S as if it's similar to the Orion on 2s i will gear very similar with 19/72, pitty i only have pinions from 22t - 26t i will have to buy a couple more.. 80mph is plenty for me to get started as i haven't gone over 60mph before

I'll get use to that and how the car needs to be set up and feels and will then try and go faster .

The RC7 motor has a little over 4000Kv. Your 22-26T pinion will be nice

.

10.17.2008, 10:15 PM

Quote:

Originally Posted by lutach

The RC7 motor has a little over 4000Kv. Your 22-26T pinion will be nice

.

Sweet , now to order a car

BL_RV0 · 10.17.2008, 10:18 PM

What are you going to get? I'd go for a buggy if you don't have one already.

10.18.2008, 12:27 AM

Quote:

Originally Posted by BL_RV0

What are you going to get? I'd go for a buggy if you don't have one already.

If you look at my sig you can see what buggy and truggy i already have

I am getting a BMI DB10R pan car for a 2s speed run car .

10.20.2008, 04:06 AM

How did you go drag racing on the weekend Luciano?

lutach · 10.20.2008, 07:22 AM

Quote:

Originally Posted by ffactory666

How did you go drag racing on the weekend Luciano?

It was too cold and windy. I couldn't get m drag car and the bike to hook up right. I almost destroyed the bike. It launched straight and then for some reason it went to the left and I couldn't bring it back to the right, so it went off flying. Only damage though was a broken CF wheelie bar. I'm going to wait until summer time now. Plus I might make my own drag bike as I don't like the design of the one I'm running.

lutach · 10.20.2008, 12:18 PM

Lincpimp,

The sensored ESC got shipped out today so you can test it in the crawler. Please post feedbacks here.

Regards.

10.20.2008, 10:56 PM

Quote:

Originally Posted by lutach

It was too cold and windy. I couldn't get m drag car and the bike to hook up right. I almost destroyed the bike. It launched straight and then for some reason it went to the left and I couldn't bring it back to the right, so it went off flying. Only damage though was a broken CF wheelie bar. I'm going to wait until summer time now. Plus I might make my own drag bike as I don't like the design of the one I'm running.

Sorry about the bike man , it would of been spectacular to capture on video . i didn't even know there was rc drag bikes .
Was looking forward to reports on the 200A esc .