Motor recommendations for 22volts?

[MetalMan]

Geez candyman, it's been a while! Still on NiMh I see... That will be the limiting factor for power output here. For reference a good 6s 5000mah pack will be able to push peaks past 3500watts, while 18 NiMh cells will be hard pressed to reach 2500watts.

1515, 2.5d all the way, it,s a beast on 6s.
But be very carefull with you MGM 16018, it,s more a 5s controller than a 6s.
It,s rate for 18 eclls NiMh, so 21.6 volts, and a fully charge 6s lipo is 25.2 volts.

I
The new 16025 Z serie seam to be rated higher on voltage.

Good luck.