 |
|
|
|
 |
|
|
 |
 |
|
 |
|
(#1)
|
|
RC-Monster Brushless
Offline
Posts: 2,864
Join Date: Jan 2007
Location: SoCal
|
10.28.2008, 06:25 PM
It is not the ESC that would get overworked, but the batteries. There are very few batteries on the market that will be able to supply the current that the motor will be asking from them. 2300KV on 6s is also asking for trouble. The RPM's will be too high to run as efficiently as possible. And honestly, the 1521 motor will be plenty to push around an LST2.
|
|
|
|
 |
 |
 |
|
Mmm |
|
|
|
|
|
(#2)
|
|
RC-Monster Carbon Fiber
Offline
Posts: 93
Join Date: Aug 2008
|
Mmm -
10.28.2008, 08:08 PM
I have a 2.5" extended Lst2 and the batteries are the new 8K 25c 6S from Maxamp. I do have a Neu Energy 5S 5k lipo that I could try it out. also my
Lst2 is quite heavy (17+) with all the batts and motor and also a big Genesis wheels and tire combo. I ran it before with a different controller and a 5S 8k batts but found out my batts were dying out on me. I figure with the 6S it should be just crazy fun. Also my Lst2 is anything but a stock, trans FOC +9 pinion gear and it still pulls with no problem. I also ran it with the 1515 1.5D and a 5S and it hauls my truck with Muggy tires real good. It is uncontrollably fast at high speed but I recently made some changes on my Muggyfied LSt2 with some control arm limiter and would like to test it. |
|
|
|
|
|
|
|
|
|
|
|
|
(#3)
|
|
RC-Monster Carbon FIBRE NOT FIBER!
Offline
Posts: 701
Join Date: Apr 2008
Location: Brisbane, Australia
|
10.28.2008, 08:14 PM
get some 50C constant 10000mah lipos which weigh a few hundred grams and your set... will jsut have to wait a few more months/years before these are available!
try find the highest C rated packs you can find which arent maxamps. Monster Max Still Working... JR SX3 Neu 1512 2D/S 12t pinion 4800 zippy-r XRAY xt8 MMM Neu 1512 3D/F 11t pinion 6s 5000 Flightmax/ 4s 4000 Turningy |
 |
|
|
|
|
|
|
|
|
|
|
(#4)
|
|
RC-Monster Carbon Fiber
Offline
Posts: 93
Join Date: Aug 2008
|
10.28.2008, 08:54 PM
Why some bashing ? I was trying to get a reply with Castle about the MMM ESC. What I do with my setup is my business not yours. I am not a newbie with this brushless conversions. So if you have no answer to the question that I asked then it's not for you.
|
|
|
|
|
|
|
|
|
|
|
|
|
(#5)
|
|
|
Supermaxx
Offline
Posts: 2,031
Join Date: Oct 2007
Location: Earth
|
10.28.2008, 09:23 PM
Quote:
 .You asked a question and you received some answers even though some of them are not what you wanted to hear. Why don't you just e-mail CC or Pm Patrick, Bernie, or Thomas and asked them if you just wanted an answer from CC  ?
Predator with OS .21TM Supermaxx with Mach .26 Revo with OS .18TZ Kyosho ST-RR Conversion Ofna CR with Tekin ESC/Motor (2) |
|
|
|
|
|
|
|
 |
«
Previous Thread
|
Next Thread
»
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | Rate This Thread |
Hybrid Mode
|
|
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
Copyright ©2000 - 2026, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
