Who Can rebuild Lipos?

[brushlessboy16]

Lipo just got back, very nice work linc!

Looks great and is very solid..



Did you have any trouble with the Deans connector on the batt? its gummed up something fierce. i almost cried when my charger said "broken connection" But i eventually got it to work with aligator clips.. no biggie just needs a new plug

[mikey09120]

hey linc,
if i send you a two 4s 4400maH packs with no connectors, can you make them into two 2s 8800maH packs with feamle traxxas connectors and black shrink wrap?

[brushlessboy16]

Originally Posted by mikey09120

hey linc,
if i send you a two 4s 4400maH packs with no connectors, can you make them into two 2s 8800maH packs with feamle traxxas connectors and black shrink wrap?

Yes he can, it will cost you the price of the connectors and wire, heatshrink and the Boose.. lol

Mine ended up being really cheap

[MetalMan]

Originally Posted by mikey09120

hey linc,
if i send you a two 4s 4400maH packs with no connectors, can you make them into two 2s 8800maH packs with feamle traxxas connectors and black shrink wrap?

Unless he completely broke that pack down into individual cells, and rebuilt it from there, each pack would have two balance connectors (two 2s packs in parallel basically). The ideal way to build a 2s2p pack is two 2p packs in series, where there would only be a single balance connector.

[mikey09120]

Originally Posted by MetalMan

Unless he completely broke that pack down into individual cells, and rebuilt it from there, each pack would have two balance connectors (two 2s packs in parallel basically). The ideal way to build a 2s2p pack is two 2p packs in series, where there would only be a single balance connector.

could he do that? to have one balance connector per pack?

[lincpimp]

Originally Posted by mikey09120

hey linc,
if i send you a two 4s 4400maH packs with no connectors, can you make them into two 2s 8800maH packs with feamle traxxas connectors and black shrink wrap?

Should not be an issue. What brand packs are they? I would break them down into 2 sets of 4 cells and make the packs from there. The cells of each 4s pack are matched so they will make a good basis for the 2s2p packs you want. Pm me for info if you like. I have traxxas connectors and will set you up with a single 2s balance connector per pack. I also have black shrink...

[mikey09120]

Originally Posted by lincpimp

Should not be an issue. What brand packs are they? I would break them down into 2 sets of 4 cells and make the packs from there. The cells of each 4s pack are matched so they will make a good basis for the 2s2p packs you want. Pm me for info if you like. I have traxxas connectors and will set you up with a single 2s balance connector per pack. I also have black shrink...

they are the zippy 4s 4400maH 15C
these
how much will my wallet hurt?
and they would be 2s 8800maH 30C with female traxxas connectors and black shrink. if possible could you make the length of the wire from the batt to the connector as short as possible.
srry for all the details

[lincpimp]

Originally Posted by mikey09120

they are the zippy 4s 4400maH 15C
these
how much will my wallet hurt?
and they would be 2s 8800maH 30C with female traxxas connectors and black shrink. if possible could you make the length of the wire from the batt to the connector as short as possible.
srry for all the details

The c rating will not change, so they will be 2s2p config with 8800mah and 15c rating. So good for 132amp cont discharge. Total cost would be around 40 bucks plus return shipping cost...

[mikey09120]

Originally Posted by lincpimp

The c rating will not change, so they will be 2s2p config with 8800mah and 15c rating. So good for 132amp cont discharge. Total cost would be around 40 bucks plus return shipping cost...

k thanx. well talk soon