wich Motor for Hyper 7 Conversion?

[magman]

My vote is this one for 5s.....

http://www.rc-monster.com/proddetail...2_2.5df&cat=20

or if money is a bigger concern, this one...

http://www.rc-monster.com/proddetail...usa3660&cat=20

The Neu is a better motor, but the Medusa is also very good and a bit cheaper...in motors, YOU GET WHAT YOU PAY FOR

[lincpimp]

I have a 1600 kv medusa 60mm motor for sale, would be great with the 6s2p a123. Check the motor sale link in my sig below and pm me if you are interested...

[Unsullied_Spy]

Originally Posted by lincpimp

I have a 1600 kv medusa 60mm motor for sale, would be great with the 6s2p a123. Check the motor sale link in my sig below and pm me if you are interested...

+1.

If you don't get Linc's motor, go for the 60mm Medusa. I'm dropping a 70mm in mine because I'm a crazy bastard that likes everything overpowered but I've heard anything more than a 60mm Medusa or Neu 1512 is a waste in a Buggy. For a Feigao or other cheap China motor a 14L on 6s should be OK if you gear down. I've got a 6XL in my Hyper 7 until my 70mm Medusa comes in and it seems to do pretty well.

ok, the neu motor is too expensive for me :(

i think i will go with a bidproducts motor.

another question, is is recommended to put 2 a123 packs with 950g in a buggy?
i think this is really heava for it, but i wanna use a123 for the fast charging times.

[Unsullied_Spy]

Originally Posted by Burnsi

another question, is is recommended to put 2 a123 packs with 950g in a buggy?
i think this is really heava for it, but i wanna use a123 for the fast charging times.

If you're racing, I wouldn't do it. If you're just bashing it should be fine but it'll probably handle weird.