Hyper 7 Brushless conversion

[rawfuls]

Glad to hear you're at least running a temp. setup!

[Chadworkz]

Isn't the 2650 built by Castle only, and the 2200 is a Neu/Castle?

[BL_RV0]

No. They're both neu/castle motors.

[Chadworkz]

Oh, ok...thanks. For some reason I was under the impression that the 2650kV was a CC motor, but I am glad to hear it is a CC/Neu.

Great motor mount,did you make that, or order it? nice buggy by the way.

[brushlessboy16]

Damn mike no props? :) Thats my work


I raced the car with the old setup.. the car nosed down horrible and would try and barrell roll in the air.. soo much fun to try and correct it in the air :)

I think you have pretty much optimized the setup on this one (and by you I mean me.) ;)

[nitrostarter]

It looks good. Is that Monster Mike's creation on the motor mount?

What batteries are you running? I was looking into this general layout but I run only 1 3s or 4s pack. I dont have 2s packs and I don't want to run my batteries in parallel, yet... So I ruled it out for me for now.

[Arct1k]

Brian G IIRC

X1-CR saddle setup... Most of my packs are 2s...

http://rc-monster.com/forum/showthread.php?t=19432

[eovnu87435ds]

it was Brian's, then it went to whitrzac. I bought his hyper 7 as a roller for spares so now I have it.

The pics show 2 flightmax 3s 4000mah packs. They aren't mine. I just got entjoles's 2x 2s 25c 5000mah NeuEnergy lipos. At the track I use the Neus for qualifying, and then the flightmax's in parallel for 3s 8000mah for the 15 minute main

[eovnu87435ds]

It's been a long time since I posted, but I did alot of work to the hyper to make sure it is as perfect for the RC-M bash!! The roller I got from whitzrac was in a better condition than most of mine, and it had alot less holes in the chassis as well, so I converted everything to his. in the process I was able to do a real thorough cleaning, so I got some pics of this very rare event. Here is the newest general info about my hyper:

MMM/2650kv combo geared 14/46
2x2s NeuEnergy 25c 5000mah lipos from entjoles!
RC-Monster custom motor mount made for BrianG's hyper a long time ago
Airtronics 94357 servo
AKA tires (Cityblocks in the front, I-beams in the rear)
OFNA super thin rims
Jconcepts Hyper 8 Illuzion body
Jconcepts buggy wing
1 Novak tray(ben has the other on his revo, I have a new set coming in though...)

Everything looks to be a nice clean setup now, its pretty well balanced and I did some tuning for the local track too

Here are some pics!


The comparison shot




New servo mount


Servo installed!


Motor mount installed


battery box installed

[eovnu87435ds]

And the (nearly) finished product!

[brushlessboy16]

You need to steal your sisters camera more often!

Looks good- we will see how she does on the track

[florianz]

cool motor mount! I'm curious if it handles different like that.
I'm a big fan of the hyper 7, very solid car I think.

btw, that's my conversion http://www.rc-monster.com/forum/show...689#post305689

florian

[brushlessboy16]

Originally Posted by trev3813

hmm,

eovnu87435ds:but the shark fin is... sharky
eovnu87435ds:without it i cant make shark noises while driving


Haha

a swing and a miss...

you strike out- at life