Emaxx-Revo-Losi 1/5 AWD On-Road racer

[SpeedAssault]

Wow ! What a Great, informative, helpful & generous FORUM ! You guys are really great. Haven't experienced that much guidance before, the links are great. I believe I have found a place I fit in. I think that what these forums should be not the vague or the acronyms or make you search, ya know. It's really nice to have it all there. I look forward to helping in some way here also.

Originally Posted by TDC57

You’re more than welcome we all help out each other whenever we can..

your MM will do great on 4s no worries, you might want to think about adding a fan and doing mods to it later.. Just a thought..

Jordan is you man on the Center diffs too.. here's link to them if you want or watch Ebay they have some XT8 and 808 center on there now of sale
http://www.amainhobbies.com/product_...oducts_id/8633
You will also need some of these..
http://www.amainhobbies.com/product_...oducts_id/8629 or Ebay for a better buy..

Best of luck again should be a fun build..

Bye the way thanks for the compliments..

Very welcome



Yea, I really like that idea of tranny-diff idea instead of big emaxx tranny. I will work it in eventually. Thank u

Originally Posted by Arct1k

For 4s I would recommend adding an extra Cap either the Novak HV 2700uf or similar.

You should also get an Ubec and the 5v fan is not a bad idea...

What do you recommend for 6 volt fans ? ?
going to use a Deminsion engineering BEC. I have Castle becs but I am using them in my Crawlers.
Humm , not sure just yet how to fit-add a Cap on the mamba, Castle tech said it will do well because they are so over built.
I'm stealing the MM out of my Latest Creation Full Throttle custom Super Crawler, build thread just added to my sig, it's got 6 watt 4 speaker MP3 stereo loaded in it complete with Real V8 engine sound.
Here's a sneak peek



My latest creation below
Console shifter turns car on
twin stick turns on stereo Amplifier
Sony MP3 with Tunes and Real V8 engine sound
18" wheel base 14" wide
Axial trans
Revo drive shafts
Losi aftershock Diffs, custom lockers
Hyper 8 shafts
Xtm hubs
custom SS axle tubes and Knuckles
1/4 Tube steel MIG welded Chassis
2wd, 4wd and DIG by Remote
HiTec 7955 front rear steering servos
Castle bec
Mamba max
Climbs great when tires are working, Moabs stink

[Ryu James]

Originally Posted by SpeedAssault

Wow ! What a Great, informative, helpful & generous FORUM ! You guys are really great. Haven't experienced that much guidance before, the links are great. I believe I have found a place I fit in. I think that what these forums should be not the vague or the acronyms or make you search, ya know. It's really nice to have it all there. I look forward to helping in some way here also.

Very welcome



Yea, I really like that idea of tranny-diff idea instead of big emaxx tranny. I will work it in eventually. Thank u



What do you recommend for 6 volt fans ? ?
going to use a Deminsion engineering BEC. I have Castle becs but I am using them in my Crawlers.
Humm , not sure just yet how to fit-add a Cap on the mamba, Castle tech said it will do well because they are so over built.
I'm stealing the MM out of my Latest Creation Full Throttle custom Super Crawler, build thread just added to my sig, it's got 6 watt 4 speaker MP3 stereo loaded in it complete with Real V8 engine sound.
Here's a sneak peek



My latest creation below
Console shifter turns car on
twin stick turns on stereo Amplifier
Sony MP3 with Tunes and Real V8 engine sound
18" wheel base 14" wide
Axial trans
Revo drive shafts
Losi aftershock Diffs, custom lockers
Hyper 8 shafts
Xtm hubs
custom SS axle tubes and Knuckles
1/4 Tube steel MIG welded Chassis
2wd, 4wd and DIG by Remote
HiTec 7955 front rear steering servos
Castle bec
Mamba max
Climbs great when tires are working, Moabs stink

dude! i love that crawler. thats what i want to build soon. i will hit you up with many questions when i do i am sure. it looks great. here is my most recent build. http://www.maximizerproducts.com/max...mm_Hex_C35.cfm

as for 1/5 scale wheels and tires check here.
http://www.oversizerc.com/c/167427/1...and-tyres.html
http://www.hm-modellbau.de/shop/

its in german but you can usually tell what it is saying by deciphering from the pics. or you can translate using this site.
http://www.freetranslation.com/

and for more 1/5 build info contact Mohanjude here on the forum. he has built more 1/5 stuff than anyone i know and has lots of resources as he lives in europe where 1/5 is more dominant.