RC-Monster Forums  

Go Back   RC-Monster Forums > Support Forums > Brushless

Reply
 
Thread Tools Rate Thread Display Modes
Old
  (#1)
Maciolus
RC-Monster Carbon Fiber
 
Offline
Posts: 100
Join Date: May 2007
Location: Poland
12.22.2008, 05:43 PM

Here you have:

Picture (safe):
http://www.hobbywing.com/upload/car/ezrun-150A.jpg

Manual (safe):
http://www.hobbywing.com/upload/manu...Run80A150A.pdf


1 Specification

1.1 Output: Continuous current 150A, burst current 1080A.
1.2 Input: 6-18 cells NiMH/NiCd or 2-6 cells LiPo.
1.3 BEC Output: 5.75V/3A (Switch mode built-in BEC).
1.4 Resistance: 0.0002 Ohm.
1.5 Motor Supported: Sensorless and sensored brushless motors
1.6 Suitable Brushless Motor: 3.5T and > 3.5T
1.7 Suitable Car: 1/5, 1/8 on-road or off-road cars / trucks for competitive race.
1.8 Size: 68mm(L) * 55mm(W) * 45mm(H).
1.9 Weight: 150g(Without wires)


2 Features

1.1 Compatible with all sensorless brushless motors and most of sensored brushless motors such as Novak, LRP and Feigao, etc.
1.2 Excellent start-up, acceleration and linearity features.
1.3 3 running modes (Forward only with brake, Forward/Reverse with brake, Forward/Reverse immediately)
1.4 4 steps of maximum reverse force adjustment.
1.5 Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
1.6 9 start modes (Also called “Punch”) from “very soft (Level 1)” to “very aggressive (Level 9)”.
1.7 Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
1.8 8 steps of timing adjustment by software.
1.9 Built-in switch mode BEC has a powerful output to supply all the electronic equipments.
1.10 Easily program with only one button and compatible with pocket-sized Program Card.
1.11 Firmware can be updated through an USB adapter (Optional equipment).
1.12 Splash proof and dustproof.


> HB L2PE + MMM + Medusa 60-1600 @ 6S A123
> HB LSP + MMM + Medusa 70-1600 @ 6S2P A123
> AE B44 + MM + Medusa 50-3300 @ 4S A123
> AE J82 + SW 5700 @ 2S LiPo
> AE TC5R + MM 6900 @ 2S LiPo
   
Reply With Quote
Old
  (#2)
e-mike
RC-Monster Aluminum
 
e-mike's Avatar
 
Offline
Posts: 764
Join Date: Apr 2008
Location: canada, quebec
12.22.2008, 05:50 PM

thanksMaciolus now when are the release date


D8t on juice!!
   
Reply With Quote
Old
  (#3)
Maciolus
RC-Monster Carbon Fiber
 
Offline
Posts: 100
Join Date: May 2007
Location: Poland
12.22.2008, 05:55 PM

4S, 80A version is avalible:
http://cgi.ebay.com/EZRUN-13T-Brushless-Motor-2300Kv-80A-ESC-Program-Card_W0QQitemZ170288860492QQcmdZViewItemQQptZRadio _Control_Parts_Accessories?hash=item170288860492&_trksid=p3286.c0.m14&_trkparms=72%3A1205|66%3A2|65%3A12|39%3A1|240%3A13 18|301%3A0|293%3A1|294%3A50
with strange 81.5mm x 46mm motor


> HB L2PE + MMM + Medusa 60-1600 @ 6S A123
> HB LSP + MMM + Medusa 70-1600 @ 6S2P A123
> AE B44 + MM + Medusa 50-3300 @ 4S A123
> AE J82 + SW 5700 @ 2S LiPo
> AE TC5R + MM 6900 @ 2S LiPo
   
Reply With Quote
Old
  (#4)
BL_RV0
RC-Monster Dual Brushless
 
BL_RV0's Avatar
 
Offline
Posts: 5,061
Join Date: Oct 2007
Location: Thousand Oaks CA
12.22.2008, 06:10 PM

...and the price


Get me back into RC!
  Send a message via Yahoo to BL_RV0 Send a message via AIM to BL_RV0 Send a message via MSN to BL_RV0  
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump







Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com