Quote:
Originally Posted by lincpimp
No, the lvc reads the entire pack voltage. I do not like the auto lipo setting, and never use it. If I were you I would hook up the castle link and set the cutoff manually at 19.2v for a 6s lipo. Which is 3.2v per cell. That will give you some extra saftey margin if one cell is weaker than the others.
|
cool, i would also like to set it to 3.2v per cell. but i thought the MMM read the pack as a whole, and not individual cells. how would it tell?
so instead of auto-lipo, i would want to go to "custom" and then just enter 19.2 into the box right?
cheers
Hybrid Mode
