E-maxx driveshafts, need stronger ones

[George16]

Originally Posted by KMN

Not too mention the UE's are 14mm hex's that cannot be upped to 17mm.

It will be in a couple of months .

[JERRY2KONE]

What do you mean by that Lito? Are you having some 17mm adapters made up, or is UE making some? Please clarify your meaning Sir.

Originally Posted by George16

It will be in a couple of months .

[George16]

Originally Posted by JERRY2KONE

What do you mean by that Lito? Are you having some 17mm adapters made up, or is UE making some? Please clarify your meaning Sir.

Jerry, Menardo (respirology in the UE forum) will be making them. I'm second in line (actually first since he's making them) on the list to get a set. Here's the link.

http://www.unlimitedengineering.com/...=21327&acon=39

Go there and order a set.

[JERRY2KONE]

Thank you Lito. I just sent a PM to Respi, so we will see if I am too late to get in on the order. He stated that he is only going to have enough adapters made to outfit 25 projects (at 5 pieces each order). The 17mm wheels was the only reason I was kind of hesitent about picking up your UE shafts. I plan on only using the Axial beadlocks from now on. Once I have enough wheels setup I will probably sell off all of my CA glued wheel sets. Anyway thanks for the info. We shall see how that goes. Later Man.

Originally Posted by George16

Jerry, Menardo (respirology in the UE forum) will be making them. I'm second in line (actually first since he's making them) on the list to get a set. Here's the link.

http://www.unlimitedengineering.com/...=21327&acon=39

Go there and order a set.