Jato Roller came in planning on putting a remote start on it

[Gee]

Hi guys, I could use some guidance as to what to look for as far as an esc to use in this project. It will be used with a 2s 7.4 lipo, a ccbec will be used to provide power from it to the electronics in the jato. It will be connected to a brushed 380 motor to crank the 3.3 motor but it will also be providing the glow plug with power at the same time. All I know is I need a brushed esc with a small foot print but not sure as to what amp size or any other considerations I should keep in mind. Thanks for the help. Again.