Best ESC option for a 5th scale?

You might want to think about the HV 110 aswell.

Originally Posted by lutach

The Jeti Spin does work with a pistol grip radio, but it doesn't have proportional brake so you'll have to keep the mechanical brake (I have 3 of them and if you're planning on buying one let me know, all you'll need is the programmer for it)
The 40.160 has a car mode. I have one in one of my truggy and it's a monster. The only problem is that it doesn't have a lipo cut-off.

I am still interested, I will PM you after I finalize my decision about the Jeti. What made you decide to run the 40.160 instead of the Jeti?

Originally Posted by What's_nitro?

What about MGM?

The only MGM that can handle 12s is the 10063 which is only rated to 100A continuous, 125A burst. At least from what is on their website. The Neu 2230 I have is capable of pulling bursts around 200A, not that I plan on ever plan on using that much power, but I like to be safe.

Originally Posted by bensf

You might want to think about the HV 110 as well.

Same as the MGM. Though if you have seen bursts of 200A through a HV110 and it survives definitly let me know.

Originally Posted by billy gunn

I am still interested, I will PM you after I finalize my decision about the Jeti. What made you decide to run the 40.160 instead of the Jeti?




The only MGM that can handle 12s is the 10063 which is only rated to 100A continuous, 125A burst. At least from what is on their website. The Neu 2230 I have is capable of pulling bursts around 200A, not that I plan on ever plan on using that much power, but I like to be safe.




Same as the MGM. Though if you have seen bursts of 200A through a HV110 and it survives definitly let me know.

I've heard that the CCHV110 is very underrated. I think one of the castle employees told me that he has seen it do 160A constant. It was a while ago so I might not be remebering 100% correctly though.

[lutach]

Originally Posted by billy gunn

I am still interested, I will PM you after I finalize my decision about the Jeti. What made you decide to run the 40.160 instead of the Jeti?

I only went with the 40.160 because of the car mode. I use motor brake instead of mechanical brake. I also had plans to swap the MCU on the Jeti with a car MCU, but that didn't work out.