new parts - RC-Monster Forums

monarchmt · 01.20.2009, 07:16 PM

told you something was in the wind---
hope this is just the beginning of more parts to come

JERRY2KONE · **Me to. -** 01.20.2009, 07:22 PM

Quote:

Originally Posted by monarchmt

told you something was in the wind---
hope this is just the beginning of more parts to come

Yea me to. I have tried talking with Robin on several occasions about refilling his stocks, but he is one stoborned old man. His attitude and poor customer communications have really made things difficult for him. Still it is nice to see that he finally has opened up his mind a little. Hopefully this will get him motivated to do more for the hobby. We all know he has the best R/C after market products of anyone. The UE name and quality is number one for Maxx vehicles. YOur right, lets hope he will keep going and make some more of his stuff. We can't live forever.

JERRY2KONE · **Rename. -** 01.20.2009, 07:26 PM

Hey there monarchmt you might want to edit this thread and change the title to something like "UE makes a comeback" to draw more attention to it. It looks kind of dull and no one is jumping in to comment because they do not know what it is about unless they actually open the thread. Just my thoughts....

monarchmt · 01.21.2009, 07:54 PM

do you know monster maxx personally??
i really want the racer x set up---
i have everything else but that---i snoozed on it when they were available thinking ue parts would always be around---
i just got the mono extension on pre order---
and asked about racer x but like you said he's not always quick to reply--
hopefully he'll make more---
i posted on buy sell trade looking for it but i want it brand new in the package so it's gonna be tough to find---

what are you running for a rc???

monarchmt · 01.21.2009, 08:02 PM

not sure how to edit the name---

JERRY2KONE · 08:51 PM

Hey there monarchmt it looks like you are pretty new to the R/C community. I was looking at your RCM info and noticed that you only have a few posts. Welcome to the gang here. I do not know Robin personally nor have I ever met him, but I have had a few discussions with Robin about making more of their stuff for us. In fact I have been talking with him for two years now, but he is very garded about doing anything these days. The problem with Robin is that he is paranoid that everyone wants to steal his ideas and make fake UE parts. So he refuses to discuss anything to do with his company and/or plans on what UE will manufacture now or in the future.

Things have been very shakey at best for UE and he is very tight lipped about anything to do with UE parts. His complaints are to the effect that making these parts have become very expensive, and not profitable for him anymore unless he raises his prices to a level that he is affraid will make his porducts out of reach for most of us money wise. Life would be much better for us if he would just fill up his shelves and get over his paranoia, but we also have to respect his position as a business owner.

Once he began making his notorious gas tank for the Harley V-Rod bike he kind of abandoned the R/C community as a whole. He is still there, but much more like a recluse these days. It is a shame the way he has treated all of us, but I am sure that there are things going on behind the scenes that we are just not privy to. It is my feeling that he is at that stage in life where being groutchy is the norm. If you try to talk with him about acquirng parts that are not in the UE stock listings he gets kind of weird. Still it never hurts to try, and if you really wnat something contact him by phone directly as well as sending him email. You can go onto the UE stie and email with him directly or his assistant Sam for help. If what you want is not in stock he will just tell you no, but there are some things that they will come up with from time to time, because they still have some stuff lying around the shop. Something as complex as the Racer-X kit is just too much for him to just whip up off the cuff. He has to make things like that as a limited/numbered run, and he has to feel confident that they will sell before he is willing to invest any of his own money into production for fear of losing money. So it can be kind of tricky.

I to have been wanting a Racer-X setup since I learned of UE three years ago, but at that price level it was out of reach for me. Until now. I was actually contacted two weeks ago by a couple of guys who are on both RCM and the UE forums. I have already received on set, but he had lost the knuckles that go with the kit, so he is refunding half of my money for the mistake. SO the kit is pretty much useless without them. I now have another guy holding a full unused set just for me. I plan on purchasing that set next month after I receive my retirement check for Feb/09. I also have a communication going with Dace owner to acquire some of his stuff. He has a post up on UE right now because he is cleaning out all of his hobby stuff and getting rid of 90% of his stuff cheap. SO I am trying to get in on some of that gear as well. You just have to keep your eyes open and jump on opportunites when they apear. This hobby sure is an exspensive adventure. Have a good day Sir.

JERRY2KONE · **By the way. -** 01.21.2009, 09:23 PM

By the way I forgot to answer your question about what R/C's I have. I started out with a stock E-Maxx three years ago, but quickly learned of the aftermarket parts available and moved on from there. I am not just a mechanic, but also a carpenter, so I believe in building things to out last me on this Earth. So I am really into the aluminum Maxx trucks. I built my first project from scratch with Integey hopups, and a HardCore aluminum tub chassis. I have a 4.5 HV Maxx in that one and it runs pretty well.

Then I built a second Maxx using various parts purchased on EBay. Then things really got complicated. I picked up an R/C lot sale from some guy who decided to get out of the hobby due to personal issues and he just needed the money. I won the final bit for over $2.5K worth of UE stuff for the sale price of just $750. It was a lucky find for me because I happenedto have the money on hand, and his loss was my gain. I am still working on that project now turning it into my high speed project. It is a UE "Lightning" chassis setup with all of the UE trimmings. I will post a thread on it later this year as I finish it and get ready to begin testing with it. I am hopeful for speeds of over 100mph with that one. It already has a double monoblock installed, with custom RCAlloys drive shafts. This thing is awesome. Then there is my RCM Maxx truck. I have all of the great RCM hybrid stuff in that one, and I am working on installing a V-twin Dewalt 18volt 970 motor setup in this one. So I have 4 SuperMaxx projects under construction right now, and I have the two plastic stock trucks which the boys are going to begin building very soon. So we are busy here at The Hill House, and 2009 is looking to be a good year for our R/C dreams. You will be seeing my projects on here soon as I plan to post up threads on each of them as then get completed. I hope that answers your question Sir.