CEN Nemesis 7.7 conversion

[jzemaxx]

Finally got some pics......truck now has full front and rear swaybar kit as well. My gosh the difference the freaking swaybars make. I can take the truck into a corner at the track faster then even my buddies E-revo. Before the sway bars I was having to brake and throttle carefully to keep it from turning over. Now I can run into a turn almost WOT and drift it.....very nice upgrade for any Nemesis or GST owner.

[jzemaxx]

continued....

[lutach]

JZ,

Are you running 4 or 6S lipos? Do you know how many AMPs (Spikes and AVG.) your set up is pushing?

[jzemaxx]

Originally Posted by lutach

JZ,

Are you running 4 or 6S lipos? Do you know how many AMPs (Spikes and AVG.) your set up is pushing?

I run 4S, 5S and 6S. Its only geared for 35mph...that is all

[lutach]

Originally Posted by jzemaxx

I run 4S, 5S and 6S. Its only geared for 35mph...that is all

Just sent you another PM, let me know what you think.

[jzemaxx]

Originally Posted by lutach

Just sent you another PM, let me know what you think.

Sounds good. Since I'm not doing any speed runs...amp spikes should be relatively low.

[JERRY2KONE]

Sweet looking project. How do you like the way it handles compared to the G3R or any of the Maxx trucks? Your setup looks very good, all except for the wire hanger holding your motor in place. Just drill it out and put in a through bolt and nut in there. Great project.

[lutach]

Originally Posted by jzemaxx

Sounds good. Since I'm not doing any speed runs...amp spikes should be relatively low.

Sent you another PM...Should I over night it, so you can use it for the race? It has 5.5mm (maybe 5mm not really sure of the size) female plugs and a single deans (You'll need a series adapter) on it already.