Post your Medusa setup here

[Jabe]

Would it be possible to you, to add some ESC setups also, like advance etc... ??
Im just testing, what setup would be good, advance 10 or 12 and start power med or high, using MMM.
My setup is:
Hyper ST Pro
MMM
Medusa V2 2200kv 80mm with RCM XL-heatsink
2x 4800mah 25C 4S Zippy-R in parrel
gearing 14/52

[Matthew_Armeni]

Losi 8ight B
Tekno Conversion
weight-8lbs RTR
MMM
Medusa 60-2200
13/48 or 14/48 depending on track
4s- Hyperion 5350 16c, Neu 5000 25c, Fully Maxx 4400 35c
Temps- Haven't seen over 160, mostly 140
Runtime- 15min mains at ARC Raceway (no warm-ups)
MMM settings- everything low or lowest, linear graph, 30% punch, no expo, no brakes

Also ran the 50-2200 for a while and it worked just fine, the 60 just has more power and snap.

[t-mange]

My setup:

Hyper 8.5
MedUsa 36-70-1600 V2
Rhino 5s 4900mah 20c
Gearing 15/46, I can gear higher if i want more speed, but I don´t
MMM settings, High start power, 100% punch control, lowest timing.
Everything runs cool, i have yet to reach 77F

Runtime depends but i get an easy 20 min run on it, maybe even 25-30 min.

[Gdot]

RB3 (linked if you need it)
36-50-3300 v2-5
18/66 on e-savage gearbox
lpr crimefighters
MM esc 10 or can use 15 deg timing, 0 punch, 30 brakes, 30 reverse
3s 5400 trakpower
3950grams
Really good value and performance from these motors. I got recommended to use 15deg timing, but I'm still running 10, and everything is not hot enough to warrant even getting the gun out.