Brushless Lightning Stadium Pro conversion

[Candyman2]

lol, yeh i know what your saying but it'll cost nothing to cut my existing one in half, slide a bit of steel tube over it and weld it at the right length.

[lutach]

Looks good.

[suicideneil]

Does indeed- I like the upper deck design, definately worth going the extra mile to have a stunning home made chassis if you're capable.

Im alright, planning on taking my pet truck for a walk next week now the good weather has finally arrived, give my Medusa 36-80-2000kv a test run on 5s lipo... should be interesting...

[Superbasher]

Didn't know you were still around Candyman. Sounds like you have got a good project going! :)

[Candyman2]

Course im still around

Im looking at a medusa 80mm 1600kv now, this Neu I got cheap is a 2y 1100kv, needs something like 30v to get the most out of it. I might have to swap it after a test run.

Made some sides to stop the cells flying out and started to trim the top deck to shape.

[lutach]

Originally Posted by Candyman2

Course im still around

Im looking at a medusa 80mm 1600kv now, this Neu I got cheap is a 2y 1100kv, needs something like 30v to get the most out of it. I might have to swap it after a test run.

Made some sides to stop the cells flying out and started to trim the top deck to shape.

Nice. I use the 1515/2Y with 8S lipos and it is a beast without the heat lol.

[Candyman2]

trimmed it a bit more and tapped and drilled a few holes





got these battery strap things from 3racing, pretty good and light so having a bit of a redesign.