Just got a brushless edition Revo!

[turbo4]

Originally Posted by BL_RV0

Go with 5s, 2 packs in parallel. FWIW Mike has some great 5s 2500mah 25c packs for sale.

Originally Posted by shizzon

I second these, they perform very well and i find 5s to be awsome for bashing on the Neu 1515/1y.

I was under the impression that anything over 3s would not fit in the battery compartments? I'll do some measuring. In the mean time how would I wire the packs to make them in parallel and not 10s Sorry, I used to know this stuff a little but I have forgot most of it.

[lincpimp]

For parallel wiring connect both pos leads to each other and the same with the neg leads. That will double your mah and keep the voltage the same. Series wiring is the oposite, where you connect the pos of one pack to the neg of another. That doubles the voltage, and the mah stays the same.

I will also suggest 5s for that truck, and the swaybar kit. Sounds like you could go up one color on the springs too, as they sound a bit soft.

[JThiessen]

Shizzon - how are you fitting 5S on your E-Revo?