need help with converting a hyper 7

[whitrzac]

what do you guys recommend to attach the esc to the buggy??

[Metallover]

I use this super velcro stuff you can get a menards and radio shack. It is like the non-furry side of regular velcro on both sides. It holds the esc on like no ones business. I would do that and a ziptie if you could.

[whitrzac]

Originally Posted by Metallover

I use this super velcro stuff you can get a menards and radio shack. It is like the non-furry side of regular velcro on both sides. It holds the esc on like no ones business. I would do that and a ziptie if you could.

I got some of that stuff, its clear, right?? I had a problem with it not sticking to the esc and were I want to mount it

[Metallover]

The stuff is called 3m dual lock. It holds everything for me. You need a screwdriver to get it apart. I have seen it clear... Mine is black. If it doesn't stick to your esc, you can use some ca glue to hold it on. Make sure you're not trying to stick it to regular velcro too.

[whitrzac]

Originally Posted by Metallover

The stuff is called 3m dual lock. It holds everything for me. You need a screwdriver to get it apart. I have seen it clear... Mine is black. If it doesn't stick to your esc, you can use some ca glue to hold it on. Make sure you're not trying to stick it to regular velcro too.

yep thats the stuff I have, I'll have to give it another try

[whitrzac]

looks like I have no choice now but to buy an RX8
rolled the buggy, flipped it over, it went 10ft then died, it was at 3leds so it didn't thermal, the BEC still works, but I have no lights, beeps, etc

it couldn't have happend at a worst time ether... people were just starting to gather around:ha: usualy stuff like this happens after a "hey watch this!!..."


it doesn't have the usual fried elc. smell though

[whitrzac]

the motor is FS if anyone is interested... the H7 will have to be put on hold for a few weeks

http://www.rc-monster.com/forum/show...989#post273989

[whitrzac]

sooo no one wants to buy my motor??