Quote:
Originally Posted by BrianG
Ok, I'm shopping around for a motor for this setup. I have no more than 67mm mounting length to work with and I'll be running 3s.
I was gonna go with a Medusa 36-60-3100 (SE version), or a Medusa 36-50-3300 (regular or SE version), but I'm also eyeballing the VXL motor. I really like the solder tabs and cover, it's between a 50mm and 60mm motor (55mm), and it's slotless. For this project, I don't need the torque of a slotted stator style, so this might work out the best.
How do these compare to a similar Medusa temp-wise?
|
Well, the vxl motor is just a feigao s can motor. So based on experience with those it should be ok, I would still go with a 50mm medusa. But that is just me. I have had good success with the 15l in my 4 tec, temps are great on 5s. Even geared for 60mph. For some reason tires will not stay on the car though...
A hacker b50 s can would be a better choice over the vxl motor. But the vxl motors are cheap, and many people can get emaxx's to do 140mph with them on 1s lipo, or something like that...
Threaded Mode
