Team losi mini lst 2 ( mlst2 )

[Jason]

what a good 3s brushless motor for my mini lst ? I dont plan to paid alot for this.. im using a cheap one 7782kv ( the one that came with ) almost no-name I think LOL! and get too much hot fast ... my gearing was 60t/19t im using the stock tires and 1/10 sidewinder esc ... and my motor mount can accept 380 size brushless motor

[littlegiant]

Originally Posted by Jason

what a good 3s brushless motor for my mini lst ? I dont plan to paid alot for this.. im using a cheap one 7782kv ( the one that came with ) almost no-name I think LOL! and get too much hot fast ... my gearing was 60t/19t im using the stock tires and 1/10 sidewinder esc ... and my motor mount can accept 380 size brushless motor

I am using a cheapo $17 380 5100kv sized motor from himodel on 28T. On 3S lipo the top speed is just slightly lower than the 1/18 xcelorin 7400kv brushless motor with a 20T pinion. But the xcelorin motor overheats even with a fan. The cheapo 380 motor has much better acceleration (tons of it. my mlst can wheelie even a loose center diff). Although slower, I don't get heat problems anymore. The max temp haven't exceed 60c even in an ambient temp of 34C. I used a 35A ezrun brushless motor with it. So far no problem with the setup.

[Jason]

this one ? :

http://www.himodel.com/electric/HiMo..._B2040-6T.html

[littlegiant]

Originally Posted by Jason

this one ? :

http://www.himodel.com/electric/HiMo..._B2040-6T.html

No. It is not listed anymore..

5100KV
Can diameter: 28mm
Can length: 35mm

The only down side to it is its current draw. It can draw over 40A under very hard acceleration with a 28T pinion on a mini-lst. But that is only momentarily.

[Jason]

this one sound like a good one no ?


http://www.himodel.com/electric/HiMo..._B2835-6T.html

[littlegiant]

Originally Posted by Jason

this one sound like a good one no ?


http://www.himodel.com/electric/HiMo..._B2835-6T.html

Yeah that's the one i am using. Somehow i missed it. :D