RC-Monster Forums  

Go Back   RC-Monster Forums > Support Forums > General Electric

Reply
 
Thread Tools Rating: Thread Rating: 2 votes, 5.00 average. Display Modes
Old
  (#1)
BrianG
RC-Monster Admin
 
BrianG's Avatar
 
Offline
Posts: 14,609
Join Date: Nov 2005
Location: Des Moines, IA
05.17.2009, 11:07 AM

Quote:
Originally Posted by SpeedAssault View Post
... that is hard to believe/understand that 5000 6s only run 5min.
I have been trying this car out with my mamba max, Thunder P 3s 2250 30c with a Feigao xl 2383 and it drives for 15 minutes until speed of 28mph starts dropping. that was with a Emaxx tranny locked in 2nd and 1/8 street slicks
...
Yup, Patrick is right, that's what I meant. If you are running for 15 minutes on 3s 2250mAh cells, this is what your setup is doing:

- Average amp draw is 9A.
- Your estimated burst amp draw is around 65A.
- Your average power is 100w
- Your estimated burst power is around 700w.

The figures make sense given the weight and gearing of your setup. If you geared up and/or made the setup heavier, your amp draw would increase and runtime would decrease.
  Send a message via Yahoo to BrianG Send a message via MSN to BrianG  
Reply With Quote
Old
  (#2)
SpeedAssault
Building my dream Brushless 4wd 1/5 scale
 
SpeedAssault's Avatar
 
Offline
Posts: 311
Join Date: Nov 2008
Location: CA Bay area
05.17.2009, 12:15 PM

[[[ First I would like to Say that all you guys are really nice to give your time and help on this and it is greatly appreciated.

? ? ?My SETUP. please tell me what you recommend from your experience and if you could tell me how to do the math.
Custom 4wd 1/5 car (9.lbs no battery), Losi 43/13 ring pinion with a losi 2.0 CD but locked with a 45s/16p, locked rear, 5" tall 1/5 scale FG street slicks and working on a way to swap wheels out for very mild dirt 3.3 tires (4.5-5") for hard pack rally driving, but mostly street stunt, bash drifting , CC Mamba Monster /2200
want 45-55mph and 20 minute minimum runtime ? ? ?


[Quote reply]
oh ok, I get it, it was about being a constant draw.

I'm not sure whether to go with a 2s and 3s in series or just Two 3s in series.
But I like the idea of split weight.

I was shopping for Batt, one site site listed it's C rating and the other site only listed is constant amperage of 75, at the time I did not know how to calculate to see if they were the same and also one battery was a EP and the other did not say and I was going to put them in parallel, by the time I got the answer the 2nd batt was also a EP he told me I should run a NP .So this battery shopping has been a Long confusing deal.

Here;s the lipo's I was looking at :
NeuEnergy 5S-1P 2500
NEU2500EP 5S1P V1 -->http://www.neumotors.com/Site/Battery_Info.html
But I have read and heard that its best to run in series
So it's either a 2s and 3s in series or Two 3s in series

Last edited by SpeedAssault; 05.18.2009 at 09:51 AM.
   
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump







Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com