kyosho 46t spur on CRT

[MetalMan]

I don't have the RCM CRT mount, but I doubt this will work unless you are running at least a 25t pinion.

If you are set on a 46t spur (which IMO is a good choice) you can get the CR mount and purchase the CR center bulkhead posts. This is what I did with my CRT, and it's been working great.

[riverat1540]

if u are going to use a spur that small go with the cr buggy mount and it should work fine if anything u may have to do some grinding on the rear chassis brace i can tell uthe crt mount i have runs fine with 14-46 gearing but if u know off the bat that is the spur u plan to use order the cr mount to keep the center diff low on the frame