 |
|
|
|
 |
|
|
 |
 |
|
 |
|
(#1)
|
|
RC-Monster Carbon Fiber
Offline
Posts: 57
Join Date: May 2009
Location: Florida , West Palm Beach
|
06.07.2009, 09:17 PM
Tom, Glue it. Clean the shaft and glue it together. Go to your automotive shop and get a glue that can withstand heat. Clean the shaft and glue it up.Let it dry 24 hours and your good to go. Try this:
http://www.permatex.com/products/Aut...e_Retainer.htm  Glenn Carlson XXX-CR XX-4 WED 8IGHT E TEN SCT Losi everything!! |
|
|
|
 |
 |
 |
|
|
|
|
|
|
(#2)
|
|
RC-Monster Aluminum
Offline
Posts: 764
Join Date: Apr 2008
Location: canada, quebec
|
06.08.2009, 12:52 AM
update...i run my combo for about 10hours and nothing else to say that amazing!!!! startup is smooth! brake is very linear...but the motor run hot(140f)..
  why??? my 2200neu castle run 20f lower than my 1700kv geared for the same speed (40mph)same lipo same outside temp...(68f)and same runtime....my esc setting brake:100% reverse:40% no drag brake timing lowest current limiter:30% ive used the same setting for the 2200kv |
|
|
|
|
|
|
 |
«
Previous Thread
|
Next Thread
»
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | Rate This Thread |
Hybrid Mode
|
|
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
Copyright ©2000 - 2026, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
