RC-Monster Forums  

Go Back   RC-Monster Forums > RC-Monster Area > General Discussion

Reply
 
Thread Tools Rate Thread Display Modes
Old
  (#1)
SpeedAssault
Building my dream Brushless 4wd 1/5 scale
 
SpeedAssault's Avatar
 
Offline
Posts: 311
Join Date: Nov 2008
Location: CA Bay area
06.08.2009, 10:07 PM

Quote:
Originally Posted by suicideneil View Post
I run 2x 4000mah 25-35c 5s Zippy-H lipos in parallel in my ~13lb GorillaMaxx. Last trip out I got around 20 minutes or more of runtime, with temps around the 90*F mark. Starting voltage was 4.2v per cell, they ended up around 3.6-3.8v IIRC when I decided to end the run as they were starting to loose a bit of punch, though they were nowhere near LVC cutoff level. For the price they cant be beat, just the occasional QC issue with cold solder joints that are easily fixed really. Long term though, I dont think too many people have put enough cycles through their packs to provide info on how much punch they loose after x number of cycles, but I would expect them to last 100+ runs if treated well and balance charged everytime, pretty standard life for lipos.
good deal ,understood. great info again SNeil
maybe I'll take the chance on one, or I guess a Turnigy, now seeing the Z flightmax is on backorder and Turnigy is the replacement.

Wish I could afford Thunder Power.

any other suggestions, brand other than flightpower, ?

thank you very much
almost had a PQ 6s 6000 25 for $150. now I'm shopping again
   
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump







Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com