Brushless Converted Cen Matrix TR - RC-Monster Forums

Arct1k · 07:46 PM

OK looks like B16 didn't include the proper motor mount - I suggest before you do anything you get a proper one from mike...

If its included that one has been bent and re-straightened mike offered to replace for 50% cost but not sure if that will run between owners - mikes a great guy so will take care of you.

If you are running a single pack I'd put the diff back in its proper location and move the battery try to the other side...

You are looking at:

280 for MM combo
45 for motor mount
+ tires, Batteries, Servo and RX

brushlessboy16 · 06.19.2009, 07:47 PM

Quote:

Originally Posted by Arct1k

OK looks like B16 didn't include the proper motor mount - I suggest before you do anything you get a proper one from mike...

If its included that one has been bent and re-straightened mike offered to replace for 50% cost but not sure if that will run between owners - mikes a great guy so will take care of you.

If you are running a single pack I'd put the diff back in its proper location and move the battery try to the other side...

You are looking at:

280 for MM combo
45 for motor mount
+ tires, Batteries, Servo and RX

It was in the box with the truck. calm down.