Brushless Converted Cen Matrix TR

[maxxdout]

Switched the stuff over:

[maxxdout]

Well it's been a while so I thought I'd post an update. I decided to go with the EZRun C4 Combo and a Turnigy 4s 5000mAh LiPo. Just placed an order last night at amain for a new body(JConcepts XT8 Illuzion), JConcepts Rulux Half-up 1/2" offset, Badland MT tires, and Ofna yellow truggy foams. Might dye the rims all black or have the front rims orange the rear rims black to go with the paint scheme which is going to be almost identical to my RC18T, but with some changed and some silver pinstriping. Also got some 1/8" lexan from a good guy off of TheToyz forums to make an ESC plate since the other one I made was fugly. Hopefully it will do with and not flex/break much, but if it does, it has a warranty and I have extra to make about 7 more plates

Here's the paint scheme I am gonna do, but with some silver pinstriping:



Still waiting on the EZRun, so here are some pics as the matrix is now...

[brushlessboy16]

Originally Posted by maxxdout

Well it's been a while so I thought I'd post an update. I decided to go with the EZRun C4 Combo and a Turnigy 4s 5000mAh LiPo. Just placed an order last night at amain for a new body(JConcepts XT8 Illuzion), JConcepts Rulux Half-up 1/2" offset, Badland MT tires, and Ofna yellow truggy foams. Might dye the rims all black or have the front rims orange the rear rims black to go with the paint scheme which is going to be almost identical to my RC18T, but with some changed and some silver pinstriping. Also got some 1/8" lexan from a good guy off of TheToyz forums to make an ESC plate since the other one I made was fugly. Hopefully it will do with and not flex/break much, but if it does, it has a warranty and I have extra to make about 7 more plates