Should I program my Mamba Max controller? Bought it used...

[R00ST]

O thats right I forgot it has the mini usb on the side...

I have seen pictures of the castle link and it shows the USB going into a small board with wires coming out that go into a receiver plug.

Looks like programming is happening tonight!

Anyone have a quick rundown of reccomendations for settings on the mamba max for 3s lipo? It will be in a 2wd pede with 4-5 inch MT tires on it geared for about 50mph tops. LincPimp should be familiar with the truck :) (thanks again!)

[BrianG]

Originally Posted by R00ST

...I have seen pictures of the castle link and it shows the USB going into a small board with wires coming out that go into a receiver plug...

That's the Castle Link device for ESCs that program from the computer via the throttle cable. AFAIK, only the MM has a built-in USB connector, so hookup is easy.

Oh, and the explanation for the main three settings can be found here: http://rc-monster.com/forum/showpost...06&postcount=3