Are Deans enough?

[J57ltr]

The link you posted was for some DDR memory, but I looked it up and the specs are lower than Deans. They state that they have less resistance than an equiv. piece of 14 gauge, Deans lists the same as 12Ga.

Jeff

Originally Posted by J57ltr

The link you posted was for some DDR memory, but I looked it up and the specs are lower than Deans. They state that they have less resistance than an equiv. piece of 14 gauge, Deans lists the same as 12Ga.

Jeff

LOL to many window open at the same time . My good pc is in the shop being fixed & I was thinking of getting a new one.Link fixed now

[florianz]

hi,

you can continue guessing...

...or go to this page, it might be the answer for your questions (it's NOT a shop):

http://www.elektromodellflug.de/hoch...romstecker.htm

it's in german, but at least you can read the figures.

I would call this guy a guru regarding RC-Electronics (chargers, batteries etc).

I have just ordered myself some golden 5,5mm plugs, and some fat 6 mm² cables (especially for motor-esc).

flo

Originally Posted by florianz

hi,

you can continue guessing...

...or go to this page, it might be the answer for your questions (it's NOT a shop):

http://www.elektromodellflug.de/hoch...romstecker.htm

it's in german, but at least you can read the figures.

I would call this guy a guru regarding RC-Electronics (chargers, batteries etc).

I have just ordered myself some golden 5,5mm plugs, and some fat 6 mm² cables (especially for motor-esc).

flo

Let's all buy Lehner gold connectors!

Resistance: <0,05mOhm
Continious: >250A

[florianz]

Originally Posted by Byte

Let's all buy Lehner gold connectors!

Resistance: <0,05mOhm
Continious: >250A

yeah, and after that I'm broke & cant't afford lipos...

the 5,5 mm bullet plugs I've bought are affordable, u get them for around eur 2,60 a pair.

but yes, it's worth to invest in good connectors.

Originally Posted by florianz

yeah, and after that I'm broke & cant't afford lipos...

the 5,5 mm bullet plugs I've bought are affordable, u get them for around eur 2,60 a pair.

but yes, it's worth to invest in good connectors.

They cost 3 euro for 1 pair

I never gonna buy such expensive connectors. For me: "Wannabe/Chinese" Deans and Hobbycity 5.5mm Goldconnectors

[florianz]

they're the plugs for the motor cables. for the batts I keep deans, at the moment. I 've learned that the real "deans" are better then the chinese copies.

I want the plugs this week and not by September... I' don't order 4 bullet plugs in HK...