centered 2" high diff and mount

[lincpimp]

I have a tower terror that I converted. I plan to use a losi motor mount, and just make up the space between the top of the mount and the side plate (tvp). I am also making new tvps, as I want the wheelbase a bit longer, and plan to use some dogbones that I have, they will dictate the wheelbase. This truck is a turd, but I like it anyway and plan to give it a new lease on life. Plus i lake making stuff.

Your best bet would be to buy a crt mount, as that is about the tallest mount Mike sells, and then modify it as necessary to fit. It uses 16mm bearings, that is the std, save for losi that uses 14mm bearings.