Recommendations for MM 8ight buggy setup.

[Arct1k]

I'd up the voltage to 4s with around a 6k for that size main (it will be heavy though) - look for a 1512 motor around 2k.

The MM will need a BEC for cool operation, extra external Low ESR cap and fan.

I wouldn't solder to the board...

[Snipin_Willy]

Originally Posted by Arct1k

I'd up the voltage to 4s with around a 6k for that size main (it will be heavy though) - look for a 1512 motor around 2k.

The MM will need a BEC for cool operation, extra external Low ESR cap and fan.

I wouldn't solder to the board...

+1

A bigger external, low ESR cap rated for 25V or higher, an external BEC, and a I would suggest a ~30mm fan screwed into the heatsink. Can't wait for the MM Pro, but I suppose that's anyones guess when that's going to be officially released.