reversing DX3s remote start channel

[slimthelineman]

was curious about that remote start button myself.... was thinking of running the cc blower off it and switching it on and off with the remote start button but sounds like its not going to work like i want it too

[shaunjohnson]

well as far as i know the remote start button is a mono-directional, momentary on channel.
so it will drive a servo as it still has PWM on the 3rd wire.

[_paralyzed_]

just read the manual and I don't even own one!

a pic would help

[shaunjohnson]

Originally Posted by _paralyzed_

just read the manual and I don't even own one!

a pic would help

manual does not say anything on the subject

i emailed horizon RC but chances are i'll never get a response from them...slack CS.

[_paralyzed_]

no the manual just states the rs can be used in either the bind or aux port. I was hoping for a pic of the switch and this "jumper wire" you speak of.

I'd contact spektrum directly.

[shaunjohnson]

http://www.hobbycity.com/hobbycity/s...idProduct=8833
that's the switch....POS dont work but isnt worth sending back lol...it will suffice for me needs...

[junkman]

Originally Posted by shaunjohnson

http://www.hobbycity.com/hobbycity/s...idProduct=8833
that's the switch....POS dont work but isnt worth sending back lol...it will suffice for me needs...

Out of curiosity what doesn't work about it? I bought a couple of them to put remote turn on lights on a couple projects, but havn't used any of them. I read some problems people were having with them on the hc forums, but I was thinking they figured it out. Had to have the switch, and thing being switched grounded the same.