1/8 scale diff 6mm output shafts - RC-Monster Forums

Bondonutz · **1/8 scale diff 6mm output shafts -** 01.01.2010, 01:56 PM

Mr. Mike,
When can we expect these back in stock sir ?

http://www.rc-monster.com/proddetail...d=RCMdiffshaft

Thanks boss,
Jeff

brushlessboy16 · 01.01.2010, 02:14 PM

Make your own.

Anything that is 6mm in diameter, cut to the proper length and drill

I used a hood prop bar on mine

http://www.mcmaster.com/#8116k62/=56rlkw

6mm rod for 5 bucks...

Bondonutz · 01.01.2010, 02:24 PM

BB16,
I actually remember your thread well, I even commented on your great idea.

The thing is I already have 2 and just assume to get 2 more and save some work and time for all the other projects I'm working on.

Thanks.

George16 · 01.01.2010, 03:39 PM

Just buy the revo/new tmaxx stub axles and cut the threaded protion off. No drilling needed since it already has the holes.

I did this for one of my projects before.

Bondonutz · 01.02.2010, 10:59 PM

I'd rather trust the heat treated peices from Mr Mike BUT, I'm half way there now after today with 5s fun.
I already have the diffy's, just need another gimmick.

lincpimp · 01.03.2010, 12:39 AM

Heat treat them yourself... Not difficult with a torch and some oil.

George16 · 01.03.2010, 12:53 AM

Quote:

Originally Posted by Bondonutz

I'd rather trust the heat treated peices from Mr Mike BUT, I'm half way there now after today with 5s fun.
I already have the diffy's, just need another gimmick.

I'm not sure if Mike sells heat treated ones but they have the same color as the revo stub axles. The only difference is the o-ring groove cut into the the RC-monster outputs. I have both of them at one point

.